This means that you can scratch, mix, cue up your records, and do everything else DJs do without ruining your record player or the stylus. Do you have a component system already? Do you have a receiver? If so, does it have a “phono” input selection? If you have powered speakers speakers that have their own power source , you can connect your turntable directly to the speakers if you want and skip the receiver altogether. The pre-amp boosts the sound of the cartridge on your turntable up to the “line” level of an iPod, CD player or cassette deck.
Product Description This electronic preamplifier stands up to the test and will provide you with serious sound performance. The PP is perfect for bringing your studio equipment’s phono-level output to a more suitable and manageable line-level output. It’ll take your audio signal, amplify its strength and prepare it for further processing by your receiver or amplifier. Preamps technically provide voltage gain to your desired equipment and are key to assisting the signal source.
The TTUSB is a unique, plug and play, USB compatible turntable that makes digitizing your vinyl record collection to your PC or Mac a snap. Packaged with all the necessary cables to connect with a computer or stereo playback system, the TTUSB is a comprehensive package that breathes new life .
First let’s take a look on the cable that connects the turntable to the receiver. This cable is shown on Figure 1. It has three plugs on each end, one red or yellow RCA standard, one white or black RCA standard and one ground wire with an “Y” shaped terminal. Cable used to connect your turntable to your receiver. Locate on the rear of your turntable were the plugs are connected. You will find two female RCA connectors and one thumb screw to connect the ground wire, see Figure 2.
The correct grounding is very important, because if this wire isn’t connected or has a bad connection you will get noise “hum” noise. This color scheme for cable connection will be the same from here on. Turntable with its cable correctly installed. The other end of the cable you will need to connect to the receiver. You cannot connect your turntable directly to your PC, you must use a receiver.
Parasound JC 3 Jr. phono – all the flexibility you need
We now have a guide for the Best Turntables and Record Players for Any Budget Building a stereo system around a turntable from scratch can be tough. Several years ago we put together a guide to selecting the best turntable for a beginner. We discussed the differences between belt drives direct drives. We talked about built-in preamps versus stand alone preamps. But it left a lot of questions unanswered. You need to know how to set up a record player sound system.
This turntable does not have a built-in phono preamp. The receiver has a built-in phono preamp with an input labeled “PHONO”. All you have to do is plug your turntable’s audio signal cable into the receiver’s phono input.
Only problem is that there is NO phono input. I’ve been told that I can use a phono preamplifier and hook it up to the “AUX. This has a phono input. Can I hook up this receiver to my Sony and use it to power my turntable? If so, how would i do that? Finally, which would be the best way to go?
3 Beginner HiFi Vinyl Setups Under $1000
I’m not running this through expensive amazing equipment, however, my sony turntable sounded good! In any case, if you’re on a budget or are just starting out with vinyl and need a decent phono preamp, go for this one! Not bulky like the old equalizer was matched to the turntable. Stacey, Iowa says It does what it is designed to do.
Feb 23, · If you have to have the turntable that far away, buy a phono preamp, and put it close to the turntable, and then connect the line level output from the turntable to a line level input on your receiver, not the phono input. That will give you by far and away the best results.
But does it equal them in sound? Its reasonable price will satisfy those looking for a fully automatic turntable that produces great sound. Deconstructing the Denon DP F Vintage Denon turntables tend to be either semi-automatic or automatic, and Denon have continued this trend with their new offerings. Also included is a cueing lever to allow the user to select tracks on the record, a must for any good automatic turntable.
I generally find automatic play a little slow and enjoy using the manual cueing lever more often than not, but the automatic option can be nice in dim environments. Another nice thing about the automatic function is that it makes using the turntable easy for guests that are not familiar with vinyl, as they can safely push play and spin vinyl of their choosing without risking damage to your records.
The motor is a belt drive DC motor as opposed to AC which allows you to use the turntable on different voltages i. It would fit right in to a vintage amplifier and speakers set-up. This means it can be used on any modern amplifier or receiver. The inbuilt preamp is a little dull, and quality vintage receivers will improve the sound if you run the turntable through the phono input.
One more step
November Introduction Some components are easy to review, speakers have gross difference that just leap out at you, often turntables do the same. But the truth is that though these gross difference are easy to describe to the point where the review writes itself they are often less than fundamental. For example a speaker with a forward midband will sound ‘middy’, but the ear soon adapts and in most cases those speakers will sound increasingly ‘flat’ as time goes on — only to have you finding the next pair of speakers sounding very dull in comparison — the old one-hand-in-hot-water-the-other-in-cold syndrome ‘habituation’ being the correct term.
Make sure it is NOT hooked into a ‘PHONO’ input it is designed to hook into ‘TAPE CD AUX’ etc inputs! Make sure your house outlet is grounded properly with a little 3 PRONG plugin tester from radio shack or a hardware store.
Moreover, if you already have purchased vinyl records, why should you have to go buy them on CD or MP3? You can then burn those MP3s to CD. Vinyl records or LPs you want to convert A record player with some sort of audio output. A computer with some sort of audio input. Appropriate connectors to get the audio from your record player into your computer.
This is the most variable part of the instructions. Chances are, your computer has a 3. I then connect that male connector into the microphone jack on my computer.
How to Connect a Turntable to Speakers
The Steelhead is unbalanced. Why can’t I have balanced outputs? Yes the Steelhead is entirely a single-ended design.
“My question is – can I still hook up my turntable to it? I actually tried to input it into the Tape 2 input, and even grounded it to the receiver, but it didn’t work (there was output, but at a very low level, with next to no bass).” Think you just answered your own question. See Art’s reply for a specific solution.
These letters furthermore, are not to be taken as being endorsed by Arthur Salvatore or High-End Audio. They are posted because they may be edifying, thought provoking or entertaining. What a huge fan base! Here is an edited letter from a reader; “I felt compelled to remind you of an excellent cartridge in the family that you’ve ignored- DL C1.
Even though this cartridge was only made during a short period of time many years ago, it’s an improved version with LC-OFC wires and a “ceramic embedded epoxy” a Japanese friend’s translation body that’s heavier at 9. Unfortunately, the only reference I had was a Grado Platinum Reference, which the Denon completely outclassed. From the specs and material used, I believe this to be an excellent cartridge in family.
I did not pay that! Shipping was about 20 bucks. I do not know where he got those numbers. For the record I have dealt extensively with both of these companies and can tell you the HIFIdo is superior in pricing and service.
How to Connect a Stereo System
The PDF files are provided under strict licence. Reproduction without prior permission or for financial gain is strictly prohibited. This website is not affiliated with or sponsored by Technics. At random times the pitch changes up or down, and when I try to adjust it the pitch control acts hypersensitive. An almost imperceptible movement swings the pitch wildly, and it’s really tough to get it to stabilize. Or is it a failing part that must be replaced?
Really satisfied with this turntable! It was packaged well. Setup was easy the instructions were really clear. I’ve never set one up before so balancing the tone arm was a new thing to me! Looks great and sounds great too. I paired these with a set of Edifier bookshelf speakers (also bought on.
Front and center behind these monitors Status: The purpose of the equalization is to permit greater playback times, improve sound quality, and to limit the vinyl damages that would otherwise arise from recording analog records without such equalization. The RIAA equalization curve has operated as a de facto global industry standard for the recording and playback of vinyl records since Before then, especially from , each record company applied its own equalization; there were over combinations of turnover and rolloff frequencies in use, the main ones being Columbia , Decca-U.
A record is cut with the low frequencies reduced and the high frequencies boosted, and on playback the opposite occurs. The result is a flat frequency response, but with noise such as hiss and clicks arising from the surface of the medium itself much attenuated. The other main benefit of the system is that low frequencies, which would otherwise cause the cutter to make large excursions when cutting a groove, are much reduced, so grooves are smaller and more can be fitted in a given surface area, yielding longer playback times.
This also has the benefit of eliminating physical stresses on the playback stylus which might otherwise be hard to cope with, or cause unpleasant distortion. A potential drawback of the system is that rumble from the playback turntable ‘s drive mechanism is greatly amplified, which means that players have to be carefully designed to avoid this. RIAA equalization is not a simple low-pass filter. Implementing this characteristic is not especially difficult, but more involved than a simple amplifier.
Most hi-fi amplifiers have a built-in phono preamplifier with the RIAA characteristic, though it is often omitted in modern designs, due to the gradual obsolescence of vinyl records. A solution in this case is to purchase an outboard preamplifier with the RIAA equalization curve, which adapts a magnetic cartridge to a standard line-level input.
This straight-up audiophile turntable costs less than you’d think
Parasound JC 3 Jr. If your cartridge is super exotic and low output, you may also require a phono stage with more gain and even more flexible loading arrangements. But they have never been what could have been described as affordable. With the JC 3 Jr. Read on to find out.
Jul 21, · A lot of times receivers do not have a designated phono input anymore. What input are you hooking into on your receiver? If it doesn’t have a dedicated phono input chances are it doesn’t have a preamp for your turntable which would cause the level to drop.
The one pictured comes from phonopreamps. In the UK, Maplin Electronics can supply one. To connect the preamp to your sound card, you need the same cable as described in the previous section. The signal leads from the turntable plug directly into the input of the preamp and you should connect the turntable’s ground wire to the ground terminal on the preamp, if it has one, to minimise mains hum pickup.
I Do Not Have a Turntable or my Turntable is built-in to an integrated system If you have no turntable, or if yours is built into an integrated system with no external cabling, you will need to get hold of one. The solution that offers the most choice, and probably the most bang for the buck, is to buy a conventional turntable perhaps secondhand and follow the steps above. Make sure you get one which stops at the end of the record so that you can leave your recordings unattended.
These can be connected directly to your computer’s sound card with the cable pictured above. And, of course, you can use a USB turntable. I Want to Record 78’s If you want to record 78’s, you must use a suitable stylus. The grooves on a 78 are wider than those on modern albums and a standard stylus will bump along the bottom of the groove and sound horrible. You do not, however, need a 78 speed setting on your turntable as VinylStudio can do the speed conversion from 33 or 45 rpm for you.
It will take longer to record each side, of course, and the results won’t be quite as good. VinylStudio’s audio cleanup tools , especially the hiss filter, are very useful with the sort of background noise you get on most 78 recordings.